Chapter 2. Measurements
Converting Units
Learning Objectives
 Convert from one unit to another unit of the same type.
In the section Expressing Units, we showed some examples of how to replace initial units with other units of the same type to get a numerical value that is easier to comprehend. In this section, we will formalize the process.
Consider a simple example: how many feet are there in 4 yards? Most people will almost automatically answer that there are 12 feet in 4 yards. How did you make this determination? Well, if there are 3 feet in 1 yard and there are 4 yards, then there are 4 × 3 = 12 feet in 4 yards.
This is correct, of course, but it is informal. Let us formalize it in a way that can be applied more generally. We know that 1 yard (yd) equals 3 feet (ft):
In math, this expression is called an equality. The rules of algebra say that you can change (i.e., multiply or divide or add or subtract) the equality (as long as you don’t divide by zero) and the new expression will still be an equality. For example, if we divide both sides by 2, we get:
We see that onehalf of a yard equals , or one and a half, feet—something we also know to be true, so the above equation is still an equality. Going back to the original equality, suppose we divide both sides of the equation by 1 yard (number and unit):
The expression is still an equality, by the rules of algebra. The left fraction equals 1. It has the same quantity in the numerator and the denominator, so it must equal 1. The quantities in the numerator and denominator cancel, both the number and the unit:
When everything cancels in a fraction, the fraction reduces to 1:
We have an expression, , that equals 1. This is a strange way to write 1, but it makes sense: 3 ft equals 1 yd, so the quantities in the numerator and denominator are the same quantity, just expressed with different units. The expression is called a , and it is used to formally change the unit of a quantity into another unit. (The process of converting units in such a formal fashion is sometimes called dimensional analysis or the factor label method.)
To see how this happens, let us start with the original quantity:
Now let us multiply this quantity by 1. When you multiply anything by 1, you don’t change the value of the quantity. Rather than multiplying by just 1, let us write 1 as :
The 4 yd term can be thought of as ; that is, it can be thought of as a fraction with 1 in the denominator. We are essentially multiplying fractions. If the same thing appears in the numerator and denominator of a fraction, they cancel. In this case, what cancels is the unit yard:
That is all that we can cancel. Now, multiply and divide all the numbers to get the final answer:
Again, we get an answer of 12 ft, just as we did originally. But in this case, we used a more formal procedure that is applicable to a variety of problems.
How many millimetres are in 14.66 m? To answer this, we need to construct a conversion factor between millimetres and metres and apply it correctly to the original quantity. We start with the definition of a millimetre, which is:
The is what the prefix milli means. Most people are more comfortable working without fractions, so we will rewrite this equation by bringing the 1,000 into the numerator of the other side of the equation:
Now we construct a conversion factor by dividing one quantity into both sides. But now a question arises: which quantity do we divide by? It turns out that we have two choices, and the two choices will give us different conversion factors, both of which equal 1:
Which conversion factor do we use? The answer is based on what unit you want to get rid of in your initial quantity. The original unit of our quantity is metres, which we want to convert to millimetres. Because the original unit is assumed to be in the numerator, to get rid of it, we want the metre unit in the denominator; then they will cancel. Therefore, we will use the second conversion factor. Cancelling units and performing the mathematics, we get:
Note how m cancels, leaving mm, which is the unit of interest.
The ability to construct and apply proper conversion factors is a very powerful mathematical technique in chemistry. You need to master this technique if you are going to be successful in this and future courses.
Example 2.6
Problems
 Convert 35.9 kL to litres.
 Convert 555 nm to metres.
Solutions
 We will use the fact that 1 kL = 1,000 L. Of the two conversion factors that can be defined, the one that will work is . Applying this conversion factor, we get:
 We will use the fact that 1 nm = m, which we will rewrite as 1,000,000,000 nm = 1 m, or 10^{9} nm = 1 m. Of the two possible conversion factors, the appropriate one has the nm unit in the denominator: . Applying this conversion factor, we get:
In the final step, we expressed the answer in scientific notation.
Test Yourself
 Convert 67.08 μL to litres.
 Convert 56.8 m to kilometres.
Answers
 6.708 × 10^{−5} L
 5.68 × 10^{−2} km
What if we have a derived unit that is the product of more than one unit, such as m^{2}? Suppose we want to convert square metres to square centimetres? The key is to remember that m^{2} means m × m, which means we have two metre units in our derived unit. That means we have to include two conversion factors, one for each unit. For example, to convert 17.6 m^{2} to square centimetres, we perform the conversion as follows:
Example 2.7
Problem
How many cubic centimetres are in 0.883 m^{3}?
Solution
With an exponent of 3, we have three length units, so by extension we need to use three conversion factors between metres and centimetres. Thus, we have:
You should demonstrate to yourself that the three metre units do indeed cancel.
Test Yourself
How many cubic millimetres are present in 0.0923 m^{3}?
Answer
9.23 × 10^{7} mm^{3}
Suppose the unit you want to convert is in the denominator of a derived unit; what then? Then, in the conversion factor, the unit you want to remove must be in the numerator. This will cancel with the original unit in the denominator and introduce a new unit in the denominator. The following example illustrates this situation.
Example 2.8
Problem
Convert 88.4 m/min to metres/second.
Solution
We want to change the unit in the denominator from minutes to seconds. Because there are 60 seconds in 1 minute (60 s = 1 min), we construct a conversion factor so that the unit we want to remove, minutes, is in the numerator: . Apply and perform the math:
Notice how the 88.4 automatically goes in the numerator. That’s because any number can be thought of as being in the numerator of a fraction divided by 1.
Test Yourself
Convert 0.203 m/min to metres/second.
Answer
0.00338 m/s or 3.38 × 10^{−3} m/s
Sometimes there will be a need to convert from one unit with one numerical prefix to another unit with a different numerical prefix. How do we handle those conversions? Well, you could memorize the conversion factors that interrelate all numerical prefixes. Or you can go the easier route: first convert the quantity to the base unit, the unit with no numerical prefix, using the definition of the original prefix. Then convert the quantity in the base unit to the desired unit using the definition of the second prefix. You can do the conversion in two separate steps or as one long algebraic step. For example, to convert 2.77 kg to milligrams:
Alternatively, it can be done in a single multistep process:
You get the same answer either way.
Example 2.9
Problem
How many nanoseconds are in 368.09 μs?
Solution
You can either do this as a onestep conversion from microseconds to nanoseconds or convert to the base unit first and then to the final desired unit. We will use the second method here, showing the two steps in a single line. Using the definitions of the prefixes micro– and nano– , we get:
Test Yourself
How many millilitres are in 607.8 kL?
Answer
6.078 × 10^{8} mL
When considering the significant figures of a final numerical answer in a conversion, there is one important case where a number does not impact the number of significant figures in a final answer—the socalled . An exact number is a number from a defined relationship, not a measured one. For example, the prefix kilo– means 1,000—exactly 1,000, no more or no less. Thus, in constructing the conversion factor
neither the 1,000 nor the 1 enter into our consideration of significant figures. The numbers in the numerator and denominator are defined exactly by what the prefix kilo– means. Another way of thinking about it is that these numbers can be thought of as having an infinite number of significant figures, such as:
The other numbers in the calculation will determine the number of significant figures in the final answer.
Example 2.10
Problem
A rectangular plot in a garden has the dimensions 36.7 cm by 128.8 cm. What is the area of the garden plot in square metres? Express your answer in the proper number of significant figures.
Solution
Area is defined as the product of the two dimensions, which we then have to convert to square metres and express our final answer to the correct number of significant figures, which in this case will be three.
The 1 and 100 in the conversion factors do not affect the determination of significant figures because they are exact numbers, defined by the centi– prefix.
Test Yourself
What is the volume of a block in cubic metres whose dimensions are 2.1 cm × 34.0 cm × 118 cm?
Answer
0.0084 m^{3}
Chemistry Is Everywhere: The Gimli Glider
On July 23, 1983, an Air Canada Boeing 767 jet had to glide to an emergency landing at Gimli Industrial Park Airport in Gimli, Manitoba, because it unexpectedly ran out of fuel during flight. There was no loss of life in the course of the emergency landing, only some minor injuries associated in part with the evacuation of the craft after landing. For the remainder of its operational life (the plane was retired in 2008), the aircraft was nicknamed “the Gimli Glider.”
The 767 took off from Montreal on its way to Ottawa, ultimately heading for Edmonton, Canada. About halfway through the flight, all the engines on the plane began to shut down because of a lack of fuel. When the final engine cut off, all electricity (which was generated by the engines) was lost; the plane became, essentially, a powerless glider. Captain Robert Pearson was an experienced glider pilot, although he had never flown a glider the size of a 767. First Officer Maurice Quintal quickly determined that the aircraft would not be able make it to Winnipeg, the next large airport. He suggested his old Royal Air Force base at Gimli Station, one of whose runways was still being used as a community airport. Between the efforts of the pilots and the flight crew, they managed to get the airplane safely on the ground (although with buckled landing gear) and all passengers off safely.
What happened? At the time, Canada was transitioning from the older English system to the metric system. The Boeing 767s were the first aircraft whose gauges were calibrated in the metric system of units (litres and kilograms) rather than the English system of units (gallons and pounds). Thus, when the fuel gauge read 22,300, the gauge meant kilograms, but the ground crew mistakenly fuelled the plane with 22,300 pounds of fuel. This ended up being just less than half of the fuel needed to make the trip, causing the engines to quit about halfway to Ottawa. Quick thinking and extraordinary skill saved the lives of 61 passengers and 8 crew members—an incident that would not have occurred if people were watching their units.
View this video on unit conversion by Dr. Jessie A. Key for a lecture on unit conversion.
Key Takeaways
 Units can be converted to other units using the proper conversion factors.
 Conversion factors are constructed from equalities that relate two different units.
 Conversions can be a single step or multistep.
 Unit conversion is a powerful mathematical technique in chemistry that must be mastered.
 Exact numbers do not affect the determination of significant figures.
Exercises
Questions
 Write the two conversion factors that exist between the two given units.
 millilitres and litres
 microseconds and seconds
 kilometres and metres
 Write the two conversion factors that exist between the two given units.
 kilograms and grams
 milliseconds and seconds
 centimetres and metres
 Perform the following conversions.
 5.4 km to metres
 0.665 m to millimetres
 0.665 m to kilometres
 Perform the following conversions.
 90.6 mL to litres
 0.00066 ML to litres
 750 L to kilolitres
 Perform the following conversions.
 17.8 μg to grams
 7.22 × 10^{2} kg to grams
 0.00118 g to nanograms
 Perform the following conversions.
 833 ns to seconds
 5.809 s to milliseconds
 2.77 × 10^{6} s to megaseconds
 Perform the following conversions.
 9.44 m^{2} to square centimetres
 3.44 × 108 mm^{3} to cubic metres
 Perform the following conversions.
 0.00444 cm^{3} to cubic metres
 8.11 × 102 m^{2} to square nanometres
 Why would it be inappropriate to convert square centimetres to cubic metres?
 Why would it be inappropriate to convert from cubic metres to cubic seconds?
 Perform the following conversions.
 45.0 m/min to metres/second
 0.000444 m/s to micrometres/second
 60.0 km/h to kilometres/second
 Perform the following conversions.
 3.4 × 10^{2} cm/s to centimetres/minute
 26.6 mm/s to millimetres/hour
 13.7 kg/L to kilograms/millilitres
 Perform the following conversions.
 0.674 kL to millilitres
 2.81 × 10^{12} mm to kilometres
 94.5 kg to milligrams
 Perform the following conversions.
 6.79 × 10^{−6} kg to micrograms
 1.22 mL to kilolitres
 9.508 × 10^{−9} ks to milliseconds
 Perform the following conversions.
 6.77 × 10^{14} ms to kiloseconds
 34,550,000 cm to kilometres
 Perform the following conversions.
 4.701 × 10^{15} mL to kilolitres
 8.022 × 10^{−11} ks to microseconds
 Perform the following conversions. Note that you will have to convert units in both the numerator and the denominator.
 88 ft/s to miles/hour (Hint: use 5,280 ft = 1 mi.)
 0.00667 km/h to metres/second
 Perform the following conversions. Note that you will have to convert units in both the numerator and the denominator.
 3.88 × 10^{2} mm/s to kilometres/hour
 1.004 kg/L to grams/millilitre
 What is the area in square millimetres of a rectangle whose sides are 2.44 cm × 6.077 cm? Express the answer to the proper number of significant figures.
 What is the volume in cubic centimetres of a cube with sides of 0.774 m? Express the answer to the proper number of significant figures.
 The formula for the area of a triangle is ½ × base × height. What is the area of a triangle in square centimetres if its base is 1.007 m and its height is 0.665 m? Express the answer to the proper number of significant figures.
 The formula for the area of a triangle is ½ × base × height. What is the area of a triangle in square metres if its base is 166 mm and its height is 930.0 mm? Express the answer to the proper number of significant figures.
Answers

 5,400 m
 665 mm
 6.65 × 10^{−4} km

 1.78 × 10^{−5} g
 7.22 × 10^{5} g
 1.18 × 10^{6} ng

 94,400 cm^{2}
 0.344 m^{3}
 One is a unit of area, and the other is a unit of volume.

 0.75 m/s
 444 µm/s
 1.666 × 10^{−2} km/s

 674,000 mL
 2.81 × 10^{6} km
 9.45 × 10^{7} mg

 6.77 × 10^{8} ks
 345.5 km

 6.0 × 10^{1} mi/h
 0.00185 m/s
 1.48 × 10^{3} mm^{2}
 3.35 × 10^{3} cm^{2}
Media Attributions
Example 2.8
Figure 2.2
A fraction that can be used to convert a quantity from one unit to another.
A number from a defined relationship that technically has an infinite number of significant figures.